View source for Dmesg m1.small ami-5647a33f

*dmesg_m1.small_ami-5647a33f
 # dmesg
 Linux version 2.6.21.7-2.fc8xen (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925(Red  Hat 4.1.2-33)) #1 SMP Fri Feb 15 12:39:36 EST 2008
 BIOS-provided physical RAM map:
 sanitize start
 sanitize bail 0
 copy_e820_map() start: 0000000000000000 size: 000000006ac00000 end: 000000006ac00000 type: 1
  Xen: 0000000000000000 - 000000006ac00000 (usable)
 980MB HIGHMEM available.
 727MB LOWMEM available.
 NX (Execute Disable) protection: active
 Entering add_active_range(0, 0, 437248) 0 entries of 256 used
 Zone PFN ranges:
   DMA             0 ->   186366
   Normal     186366 ->   186366
   HighMem    186366 ->   437248
 early_node_map[1] active PFN ranges
     0:        0 ->   437248
 On node 0 totalpages: 437248
   DMA zone: 1455 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 184911 pages, LIFO batch:31
   Normal zone: 0 pages used for memmap
   HighMem zone: 1960 pages used for memmap
   HighMem zone: 248922 pages, LIFO batch:31
 ACPI in unprivileged domain disabled
 Detected 2600.020 MHz processor.
 Built 1 zonelists.  Total pages: 433833
 Kernel command line:  root=/dev/sda1 ro 4
 Enabling fast FPU save and restore... done.
 Enabling unmasked SIMD FPU exception support... done.
 Initializing CPU#0
 CPU 0 irqstacks, hard=c136c000 soft=c134c000
 PID hash table entries: 4096 (order: 12, 16384 bytes)
 Xen reported: 2599.998 MHz processor.
 Console: colour dummy device 80x25
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
 Software IO TLB disabled
 vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
 Memory: 1711020k/1748992k available (2071k kernel code, 28636k reserved, 1080k data, 188k init, 1003528k highmem)
 virtual kernel memory layout:
     fixmap  : 0xf5315000 - 0xf57fe000   (5028 kB)
     pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
     vmalloc : 0xee000000 - 0xf4ffe000   ( 111 MB)
     lowmem  : 0xc0000000 - 0xed7fe000   ( 727 MB)
       .init : 0xc1319000 - 0xc1348000   ( 188 kB)
       .data : 0xc1205e6e - 0xc1313fd4   (1080 kB)
       .text : 0xc1000000 - 0xc1205e6e   (2071 kB)
 Checking if this processor honours the WP bit even in supervisor mode... Ok.
 Calibrating delay using timer specific routine.. 6502.65 BogoMIPS (lpj=13005314)
 Security Framework v1.0.0 initialized
 SELinux:  Initializing.
 SELinux:  Starting in permissive mode
 selinux_register_security:  Registering secondary module capability
 Capability LSM initialized as secondary
 Mount-cache hash table entries: 512
 CPU: After generic identify, caps: 178bc3f1 ebd3fbff 00000000 00000000 00002001 00000000 0000001f
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU: After all inits, caps: 178bc3f1 ebd3fbff 00000000 00000410 00002001 00000000 0000001f
 Checking 'hlt' instruction... OK.
 SMP alternatives: switching to UP code
 Freeing SMP alternatives: 13k freed
 Brought up 1 CPUs
 sizeof(vma)=88 bytes
 sizeof(page)=32 bytes
 sizeof(inode)=336 bytes
 sizeof(dentry)=132 bytes
 sizeof(ext3inode)=488 bytes
 sizeof(buffer_head)=56 bytes
 sizeof(skbuff)=176 bytes
 sizeof(task_struct)=1376 bytes
 NET: Registered protocol family 16
 Brought up 1 CPUs
 PCI: Fatal: No config space access function found
 PCI: setting up Xen PCI frontend stub
 Setting up standard PCI resources
 ACPI: Interpreter disabled.
 Linux Plug and Play Support v0.97 (c) Adam Belay
 pnp: PnP ACPI: disabled
 xen_mem: Initialising balloon driver.
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 PCI: System does not support PCI
 PCI: System does not support PCI
 NetLabel: Initializing
 NetLabel:  domain hash size = 128
 NetLabel:  protocols = UNLABELED CIPSOv4
 NetLabel:  unlabeled traffic allowed by default
 NET: Registered protocol family 2
 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
 TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
 TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
 TCP: Hash tables configured (established 131072 bind 65536)
 TCP reno registered
 checking if image is initramfs... it is
 Freeing initrd memory: 6775k freed
 audit: initializing netlink socket (disabled)
 audit(1242091238.129:1): initialized
 highmem bounce pool size: 64 pages
 VFS: Disk quotas dquot_6.5.1
 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 SELinux:  Registering netfilter hooks
 ksign: Installing public key data
 Loading keyring
 io scheduler noop registered
 io scheduler anticipatory registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
 pci_hotplug: PCI Hot Plug PCI Core version: 0.5
 rtc: IRQ 8 is not free.
 Non-volatile memory driver v1.2
 Linux agpgart interface v0.102 (c) Dave Jones
 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
 input: Macintosh mouse button emulation as /class/input/input0
 Xen virtual console successfully installed as xvc0
 Event-channel device installed.
 usbcore: registered new interface driver hiddev
 usbcore: registered new interface driver usbhid
 drivers/usb/input/hid-core.c: v2.6:USB HID core driver
 PNP: No PS/2 controller found. Probing ports directly.
 i8042.c: No controller found.
 mice: PS/2 mouse device common for all mice
 TCP bic registered
 Initializing XFRM netlink socket
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2218 HE processors (version 2.00.00)
 powernow-k8: BIOS error - no PSB or ACPI _PSS objects
 Using IPI No-Shortcut mode
 XENBUS: Device with no driver: device/vif/0
 XENBUS: Device with no driver: device/vbd/2050
 XENBUS: Device with no driver: device/vbd/2051
 XENBUS: Device with no driver: device/vbd/2049
 drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
 Freeing unused kernel memory: 188k freed
 Write protecting the kernel read-only data: 795k
 netfront: Initialising virtual ethernet driver.
 netfront: device eth0 has flipping receive path.
 xen-vbd: registered block device major 8
 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 USB Universal Host Controller Interface driver v3.0
 kjournald starting.  Commit interval 5 seconds
 EXT3-fs: mounted filesystem with ordered data mode.
 input: PC Speaker as /class/input/input1
 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
 device-mapper: multipath: version 1.0.5 loaded
 EXT3 FS on sda1, internal journal
 kjournald starting.  Commit interval 5 seconds
 EXT3-fs warning: checktime reached, running e2fsck is recommended
 EXT3 FS on sda2, internal journal
 EXT3-fs: mounted filesystem with ordered data mode.
 Adding 917496k swap on /dev/sda3.  Priority:-1 extents:1 across:917496k
 NET: Registered protocol family 10
 lo: Disabled Privacy Extensions
 Mobile IPv6
 fuse init (API version 7.8)
 eth0: no IPv6 routers present