Dmesg m1.small ami-5647a33f
Jump to navigation
Jump to search
- dmesg_m1.small_ami-5647a33f
# dmesg
Linux version 2.6.21.7-2.fc8xen (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925(Red Hat 4.1.2-33)) #1 SMP Fri Feb 15 12:39:36 EST 2008
BIOS-provided physical RAM map:
sanitize start
sanitize bail 0
copy_e820_map() start: 0000000000000000 size: 000000006ac00000 end: 000000006ac00000 type: 1
Xen: 0000000000000000 - 000000006ac00000 (usable)
980MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
Entering add_active_range(0, 0, 437248) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 186366
Normal 186366 -> 186366
HighMem 186366 -> 437248
early_node_map[1] active PFN ranges
0: 0 -> 437248
On node 0 totalpages: 437248
DMA zone: 1455 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 184911 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
HighMem zone: 1960 pages used for memmap
HighMem zone: 248922 pages, LIFO batch:31
ACPI in unprivileged domain disabled
Detected 2600.020 MHz processor.
Built 1 zonelists. Total pages: 433833
Kernel command line: root=/dev/sda1 ro 4
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c136c000 soft=c134c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2599.998 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 1711020k/1748992k available (2071k kernel code, 28636k reserved, 1080k data, 188k init, 1003528k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xee000000 - 0xf4ffe000 ( 111 MB)
lowmem : 0xc0000000 - 0xed7fe000 ( 727 MB)
.init : 0xc1319000 - 0xc1348000 ( 188 kB)
.data : 0xc1205e6e - 0xc1313fd4 (1080 kB)
.text : 0xc1000000 - 0xc1205e6e (2071 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6502.65 BogoMIPS (lpj=13005314)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bc3f1 ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 178bc3f1 ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
Brought up 1 CPUs
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1376 bytes
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6775k freed
audit: initializing netlink socket (disabled)
audit(1242091238.129:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Xen virtual console successfully installed as xvc0
Event-channel device installed.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2218 HE processors (version 2.00.00)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vbd/2051
XENBUS: Device with no driver: device/vbd/2049
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 188k freed
Write protecting the kernel read-only data: 795k
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has flipping receive path.
xen-vbd: registered block device major 8
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 917496k swap on /dev/sda3. Priority:-1 extents:1 across:917496k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
fuse init (API version 7.8)
eth0: no IPv6 routers present