OpenWrt for Arduino Yun cheat sheet: Difference between revisions

OpenWrt for Arduino Yun cheat sheet (view source)

520 bytes removed , 9 May 2019

7,137

edits

@@ Line 204: / Line 204: @@
 </syntaxhighlight>
-memo memo
+memo memo... be careful
 <syntaxhighlight lang="bash" enclose="div">
-setenv serverip 192.168.0.101;
+setenv board Yun
-setenv ipaddr 192.168.0.120;
+setenv mtdparts "spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro"
-ping 192.168.0.101;
+setenv rootfstype "squashfs,jffs2"
+setenv bootargs "console=ttyATH0,250000 board=Yun mem=64M"
-tftp 0x80060000 openwrt-ar71xx-generic-uImage-lzma.bin;
+setenv noinitrd
-erase 00x050000 +$filesize;
-cp.b $fileaddr 0x050000 $filesize;
-tftp 0x80060000 openwrt-ar71xx-generic-root.squashfs;
-erase 0x0E30000 +$filesize;
-cp.b $fileaddr 0x0E30000 $filesize;
-reset
 </syntaxhighlight>
@@ Line 225: / Line 219: @@
 <syntaxhighlight lang="bash" enclose="div">
-setenv serverip 192.168.0.101;
+setenv serverip 192.168.1.10;
-setenv ipaddr 192.168.0.120;
+setenv ipaddr 192.168.1.1;
-ping 192.168.0.101;
+ping 192.168.1.10;
-</syntaxhighlight>
-<syntaxhighlight lang="bash" enclose="div">
-tftp 0x80060000 openwrt-ar71xx-generic-uImage-lzma.bin;
-erase 0x9FDE0000 +$filesize;
-cp.b $fileaddr 0x9FDE0000 $filesize;
-tftp 0x80060000 openwrt-ar71xx-generic-root.squashfs;
-erase 0x9F050000 +$filesize;
-cp.b $fileaddr 0x9F050000 $filesize;
-reset
-</syntaxhighlight>
-<syntaxhighlight lang="bash" enclose="div">
-saveenv
-setenv console ttyATH0,250000
-saveenv
-reset
 </syntaxhighlight>