7,166
edits
(51 intermediate revisions by the same user not shown) | |||
Line 67: | Line 67: | ||
===AVR toolchain 配置=== | ===AVR toolchain 配置=== | ||
[https://github.com/arduino/toolchain-avr The AVR toolchain used by the Arduino IDE] | [https://github.com/arduino/toolchain-avr The AVR toolchain used by the Arduino IDE] | ||
:arduino IDE 1.6.1 の場合は release 3.4.5 である。tag を指定して git clone する。 | :arduino IDE 1.6.1 の場合は AVR toolchain release 3.4.5 である。tag を指定して git clone する。 | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
git clone --depth=1 --branch 3.4.5 --single-branch https://github.com/arduino/toolchain-avr.git | git clone --depth=1 --branch 3.4.5 --single-branch https://github.com/arduino/toolchain-avr.git | ||
Line 361: | Line 361: | ||
ano (ino) ではなく、こちらのほうが使い勝手が良いかも。 | ano (ino) ではなく、こちらのほうが使い勝手が良いかも。 | ||
Arduino IDE 由来の AVR toolchain ではなく、本家 [http://distribute.atmel.no/tools/opensource/Atmel-AVR-GNU-Toolchain/3.5.0/ Atmel AVR 8-bit GNU Toolchain] を cygwin で build しても動くかもとおもったが、Arduino IDE に絡んでいることが発覚。Arduino.cc の AVR toolchain の 3.5.0 版でチャレンジ。 | |||
:Arduino.cc 版 AVR toolchain 3.5.0 ポーティング自体が、はまだ作業途中なので、動く状態だけど、様子見 | |||
[https://github.com/nxhack/toolchain-avr/tree/cygwin_only-3.5.0 avr toolchain 3.5.0 cygwin only] | |||
[https://github.com/arduino/toolchain-avr/compare/trecinquezero...nxhack:cygwin_only-3.5.0 本家との差分] | |||
<syntaxhighlight lang="bash"> | |||
git clone -b cygwin_only-3.5.0 https://github.com/nxhack/toolchain-avr.git | |||
cd toolchain-avr | |||
./arch.cygwin.build.bash | |||
</syntaxhighlight> | |||
= Develop = | = Develop = | ||
(レガシープログラマーのリハビリ大作戦) | |||
== Arduino 系の雑多なメモ == | == Arduino 系の雑多なメモ == | ||
=== Library 作成 === | === Library 作成 === | ||
Line 383: | Line 396: | ||
AVR のニーモニックで HALT (Z80 や x86 でおなじみ) がみつからない。SLEEP てーのがそれかな? | AVR のニーモニックで HALT (Z80 や x86 でおなじみ) がみつからない。SLEEP てーのがそれかな? | ||
[http://playground.arduino.cc/Learning/ArduinoSleepCode How to let your Arduino go to sleep and wake up on an external event.] | [http://playground.arduino.cc/Learning/ArduinoSleepCode How to let your Arduino go to sleep and wake up on an external event.] | ||
<syntaxhighlight lang="text" enclose="div"> | |||
SLEEP_MODE_IDLE | |||
SLEEP_MODE_ADC | |||
SLEEP_MODE_PWR_SAVE | |||
SLEEP_MODE_EXT_STANDBY | |||
SLEEP_MODE_STANDBY | |||
SLEEP_MODE_PWR_DOWN | |||
</syntaxhighlight> | |||
==== sleep_mode() ==== | ==== sleep_mode() ==== | ||
Line 407: | Line 429: | ||
もちろん、power_*_disable() もある。いったん power_all_disable() してから個別に設定も可。 | もちろん、power_*_disable() もある。いったん power_all_disable() してから個別に設定も可。 | ||
==== float の printf | ==== Power Save いろいろ ==== | ||
これから試してみる... | |||
<syntaxhighlight lang="c" enclose="div"> | |||
set_sleep_mode (SLEEP_MODE_PWR_DOWN); | |||
byte old_ADCSRA = ADCSRA; | |||
ADCSRA = 0; | |||
sleep_mode(); | |||
ADCSRA = old_ADCSRA; | |||
</syntaxhighlight> | |||
<syntaxhighlight lang="c" enclose="div"> | |||
noInterrupts(); | |||
set_sleep_mode(SLEEP_MODE_PWR_DOWN); | |||
sleep_enable(); | |||
sleep_bod_disable(); | |||
interrupts(); | |||
sleep_cpu(); | |||
sleep_disable(); | |||
</syntaxhighlight> | |||
avr/sleep.h のコメント読む... | |||
<syntaxhighlight lang="c" enclose="div"> | |||
#include <avr/sleep.h> | |||
... | |||
set_sleep_mode(<mode>); | |||
sleep_mode(); | |||
</syntaxhighlight> | |||
<syntaxhighlight lang="c" enclose="div"> | |||
#include <avr/interrupt.h> | |||
#include <avr/sleep.h> | |||
... | |||
set_sleep_mode(<mode>); | |||
cli(); | |||
if (some_condition) | |||
{ | |||
sleep_enable(); | |||
sei(); | |||
sleep_cpu(); | |||
sleep_disable(); | |||
} | |||
sei(); | |||
</syntaxhighlight> | |||
<syntaxhighlight lang="c" enclose="div"> | |||
#include <avr/interrupt.h> | |||
#include <avr/sleep.h> | |||
... | |||
set_sleep_mode(<mode>); | |||
cli(); | |||
if (some_condition) | |||
{ | |||
sleep_enable(); | |||
sleep_bod_disable(); | |||
sei(); | |||
sleep_cpu(); | |||
sleep_disable(); | |||
} | |||
sei(); | |||
</syntaxhighlight> | |||
実測の結果: | |||
<syntaxhighlight lang="c" enclose="div"> | |||
#include <avr/sleep.h> | |||
#include <avr/power.h> | |||
#ifndef cbi | |||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) | |||
#endif | |||
#ifndef sbi | |||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) | |||
#endif | |||
... | |||
set_sleep_mode(SLEEP_MODE_PWR_DOWN); | |||
cbi(ADCSRA, ADEN); | |||
power_all_disable(); | |||
//noInterrupts(); | |||
sleep_enable(); | |||
sleep_bod_disable(); | |||
//interrupts(); | |||
sleep_cpu(); | |||
sleep_disable(); | |||
power_all_enable(); | |||
sbi(ADCSRA, ADEN); | |||
</syntaxhighlight> | |||
==== disable BOD ==== | |||
ブラウンアウト機能 要調査 | |||
uno.bootloader.extended_fuses=0x07 | |||
[http://jasper.sikken.nl/arduinobootloader/index.html Arduino Uno brown-out detection] | |||
=== float の printf === | |||
Arduino UNO (atmega328p) は float と double の差はない。[https://www.arduino.cc/en/Reference/Double Double] | |||
printf 系は float は使えない。'?' に変換される。(小一時間ハマった) | printf 系は float は使えない。'?' に変換される。(小一時間ハマった) | ||
:avr-ld のオプションに -lprintf_flt -lm を追加したら動く。コードが大きくなるので、標準ではミニマム機能のみにしている。 | |||
avr libs の | avr libs の (stdlib.h) で代用できる。[http://www.nongnu.org/avr-libc/user-manual/group__avr__stdlib.html#ga6c140bdd3b9bd740a1490137317caa44 dtostre, dtostrf] | ||
:そもそも FPU の無いマイコンで浮動小数使うのはダメね。無理やり整数か、美しくするなら固定小数点で書き換える。 | :そもそも FPU の無いマイコンで浮動小数使うのはダメね。無理やり整数か、美しくするなら固定小数点で書き換える。 | ||
Line 421: | Line 539: | ||
[http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf ISO/IEC TR 18037:2006(E)] | [http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf ISO/IEC TR 18037:2006(E)] | ||
:固定小数点 fixed point の情報すくないね。もともと FPU の無い マイコン系の拡張なのでネットでも情報出て無い。 | :固定小数点 fixed point の情報すくないね。もともと FPU の無い マイコン系の拡張なのでネットでも情報出て無い。 | ||
:gcc の拡張は動くけど、g++ は未対応なので、arduino の場合は pure C では使えるが、いろいろ大変そう。 | |||
==== メモメモ | === Tips === | ||
[http://embeddedgurus.com/stack-overflow/category/efficient-cc/ Efficient C/C++ « Stack Overflow] | |||
:(富豪的プログラミングになれてしまてっていたので)マイコンのプログラムテクニックは新鮮。 | |||
:除算は工夫して少なく。できたら浮動小数は使わない。 | |||
:むかしむかし、HP-PA のコンパイラの出すコードに関心したように、RISC の場合は、あるていどコンパイラー任せにできるような(わかりやすい)コードを心がけるのも忘れないように。(むかしついでに... HP-PA の 浮動小数点プロセッサーが Intel 系のそれと精度がちがっていて数日ハマってたな) | |||
==== 除算 ==== | |||
[http://embeddedgurus.com/stack-overflow/2009/06/division-of-integers-by-constants/ Division of integers by constants « Stack Overflow] | |||
:Using the values generated by Jones, together with some of the values I have computed, here’s a summary of some common divisors for unsigned 16 bit integers. | |||
<syntaxhighlight lang="c" enclose="div"> | |||
Divide by 3: (((uint32_t)A * (uint32_t)0xAAAB) >> 16) >> 1 | |||
Divide by 5: (((uint32_t)A * (uint32_t)0xCCCD) >> 16) >> 2 | |||
Divide by 6: (((uint32_t)A * (uint32_t)0xAAAB) >> 16) >> 2 | |||
Divide by 7: ((((uint32_t)A * (uint32_t)0x2493) >> 16) + A) >> 1) >> 2 | |||
Divide by 9: (((uint32_t)A * (uint32_t)0xE38F) >> 16) >> 3 | |||
Divide by 10: (((uint32_t)A * (uint32_t)0xCCCD) >> 16) >> 3 | |||
Divide by 11: (((uint32_t)A * (uint32_t)0xBA2F) >> 16) >> 3 | |||
Divide by 12: (((uint32_t)A * (uint32_t)0xAAAB) >> 16) >> 3 | |||
Divide by 13: (((uint32_t)A * (uint32_t)0x9D8A) >> 16) >> 3 | |||
Divide by 14: ((((uint32_t)A * (uint32_t)0x2493) >> 16) + A) >> 1) >> 3 | |||
Divide by 15: (((uint32_t)A * (uint32_t)0x8889) >> 16) >> 3 | |||
Divide by 30: (((uint32_t)A * (uint32_t)0x8889) >> 16) >> 4 | |||
Divide by 60: (((uint32_t)A * (uint32_t)0x8889) >> 16) >> 5 | |||
Divide by 100: (((((uint32_t)A * (uint32_t)0x47AF) >> 16U) + A) >> 1) >> 6 | |||
Divide by PI: ((((uint32_t)A * (uint32_t)0x45F3) >> 16) + A) >> 1) >> 1 | |||
Divide by √2: (((uint32_t)A * (uint32_t)0xB505) >> 16) >> 0 | |||
</syntaxhighlight> | |||
==== modulus (%) ==== | |||
[http://embeddedgurus.com/stack-overflow/2011/02/efficient-c-tip-13-use-the-modulus-operator-with-caution/ Efficient C Tip #13 – use the modulus (%) operator with caution « Stack Overflow] | |||
<syntaxhighlight lang="c" enclose="div"> | |||
void display_value(uint16_t value) | |||
{ | |||
uint8_t msd, nsd, lsd; | |||
if (value > 999) | |||
{ | |||
value = 999; | |||
} | |||
lsd = value % 10; | |||
value /= 10; | |||
nsd = value % 10; | |||
value /= 10; | |||
msd = value; | |||
/* Now display the digits */ | |||
} | |||
</syntaxhighlight> | |||
<syntaxhighlight lang="c" enclose="div"> | |||
void display_value(uint16_t value) | |||
{ | |||
uint8_t msd, nsd, lsd; | |||
if (value > 999U) | |||
{ | |||
value = 999U; | |||
} | |||
msd = value / 100U; | |||
value -= msd * 100U; | |||
nsd = value / 10U; | |||
value -= nsd * 10U; | |||
lsd = value; | |||
/* Now display the digits */ | |||
} | |||
</syntaxhighlight> | |||
==== Fast loops ==== | |||
[http://embeddedgurus.com/stack-overflow/2009/03/efficient-c-tips-7-fast-loops/ Efficient C Tips #7 – Fast loops « Stack Overflow] | |||
<syntaxhighlight lang="text" enclose="div"> | |||
So how does this efficiency arise? Well in the count up case, the assembly language generated by the compiler typically looks something like this: | |||
INC lpc ; Increment loop counter | |||
SUB lpc, #10 ; Compare loop counter to 10 | |||
BNZ loop ; Branch if loop counter not equal to 10 | |||
By contrast, in the count down case the assembly language looks something like this | |||
DEC lpc ; Decrement loop counter | |||
BNZ loop ; Branch if non zero | |||
Evidently, because of the ‘specialness’ of zero, more efficient code can be generated. | |||
</syntaxhighlight> | |||
=== メモメモ=== | |||
[http://www.gammon.com.au/power Gammon Forum : Electronics : Microprocessors : Power saving techniques for microprocessors] | [http://www.gammon.com.au/power Gammon Forum : Electronics : Microprocessors : Power saving techniques for microprocessors] | ||
: | :sleep 系はここがまとまってる | ||
[http://programresource.net/2015/04/23/2547.html ArduinoでDS3231 RTCモジュールを使った定期処理 | Program Resource] | [http://programresource.net/2015/04/23/2547.html ArduinoでDS3231 RTCモジュールを使った定期処理 | Program Resource] | ||
Line 468: | Line 679: | ||
基本の7セグ | 基本の7セグ | ||
[http://www.thecoderscorner.com/electronics/microcontrollers/driving-displays/45-arduino-example-for-driving-7-segment-led-s Arduino 7 segment LED display tutorial] | [http://www.thecoderscorner.com/electronics/microcontrollers/driving-displays/45-arduino-example-for-driving-7-segment-led-s Arduino 7 segment LED display tutorial] | ||
:[http://garretlab.web.fc2.com/arduino_reference/language/structure/bitwise_operators/port_manipulation.html | :[http://garretlab.web.fc2.com/arduino_reference/language/structure/bitwise_operators/port_manipulation.html ポート・レジスタ]使わない形の一番シンプルなもの | ||
=== AVR libc === | === AVR libc === | ||
[http://cega.jp/avr-libc-jp/ AVR Libc 日本語] | [http://cega.jp/avr-libc-jp/ AVR Libc 日本語] | ||
[http://www.akamoz.jp/you/junkbox/avr/avr-libc.htm AVR libcを使ってみる you/junkbox] | |||
=== IoT するなら === | === IoT するなら === | ||
Line 479: | Line 692: | ||
[http://recruit.gmo.jp/engineer/jisedai/blog/%E3%80%90%E9%9B%BB%E5%AD%90%E5%B7%A5%E4%BD%9C%E3%80%91arduino-yun%E3%82%92google-docs%E3%82%84twitter%E3%81%A8%E9%80%A3%E6%90%BA%E3%81%97%E3%81%A6%E3%81%BF%E3%81%9F/ 【電子工作】Arduino YúnをGoogle DocsやTwitterと連携してみた | GMOインターネット 次世代システム研究室] | [http://recruit.gmo.jp/engineer/jisedai/blog/%E3%80%90%E9%9B%BB%E5%AD%90%E5%B7%A5%E4%BD%9C%E3%80%91arduino-yun%E3%82%92google-docs%E3%82%84twitter%E3%81%A8%E9%80%A3%E6%90%BA%E3%81%97%E3%81%A6%E3%81%BF%E3%81%9F/ 【電子工作】Arduino YúnをGoogle DocsやTwitterと連携してみた | GMOインターネット 次世代システム研究室] | ||
[http://blog.parse.com/learn/using-parse-for-iot-to-create-an-order-button/ Using Parse for IoT to Create an Order Button] | [http://blog.parse.com/learn/using-parse-for-iot-to-create-an-order-button/ Using Parse for IoT to Create an Order Button] | ||
[http://qiita.com/ToshiakiEnami/items/7b4b3090f3687979d21a awsIoT - 太陽光パネルの発電量をAWS IoTとAmazon Elasticsearch Serviceを使って可視化してみる | [http://qiita.com/ToshiakiEnami/items/7b4b3090f3687979d21a awsIoT - 太陽光パネルの発電量をAWS IoTとAmazon Elasticsearch Serviceを使って可視化してみる] | ||
[https://github.com/aws/aws-iot-device-sdk-arduino-yun/ SDK for connecting to AWS IoT from an Arduino Yún] | [https://github.com/aws/aws-iot-device-sdk-arduino-yun/ SDK for connecting to AWS IoT from an Arduino Yún] | ||
Line 491: | Line 704: | ||
[http://ser2net.sourceforge.net/ Serial to Network Proxy (ser2net)] | [http://ser2net.sourceforge.net/ Serial to Network Proxy (ser2net)] | ||
[http://qiita.com/syoyo/items/d31e9db6851dfee3ef82 tunneling - Reverse ssh tunnel を安定運用する | [http://qiita.com/syoyo/items/d31e9db6851dfee3ef82 tunneling - Reverse ssh tunnel を安定運用する] | ||
[http://mm011106.github.io/blog/2015/02/23/init-dot-d-script/ init.dスクリプトを書いてみる - MQTT and …] | [http://mm011106.github.io/blog/2015/02/23/init-dot-d-script/ init.dスクリプトを書いてみる - MQTT and …] | ||
== Arduino の歴史 == | |||
[http://arduinohistory.github.io/ja.html Arduinoの語られざる歴史] | |||
:こえーーー | |||
[http://wiring.org.co/ Wiring] |