Arduino cheat sheet
Jump to navigation
Jump to search
Arduino + cygwin + ino (ano) ハマりどころメモ
without Arduino IDE
Arduino from the Command Line Arturo
ano は versions 1.6.1 は動くとのこと
- cygwin 特有の問題
toolchain-avr を cygwin で compile The AVR toolchain used by the Arduino IDE
1.6.1 用は release 3.4.5
git clone -b 3.4.5 https://github.com/arduino/toolchain-avr.git
- toolchain-avr ハマりどころ
cygwin 32bit 版つかうこと (64bit でもうごきそうですか)
git wget unzip zip gperf bison flex make patch *** automake *** autoconf gcc-g++ *** texinfo (must be at version 4.13 since 5+ won't work) libncurses-devel
Readme.md にあるように texinfo の指定バージョン 4.13 は cygwin にないので、自分でコンパイル。 ついでに (autoconf-2.64) automake-1.11.1 texinfo-4.13 は cygwin のパッケージつかわないで自分でコンパイルする。
arch.win32.build.bash はつかわない。なので MinGW 環境は不要。
bash build.all.bash
10時間ほどコンパイルにかかる。
- 配置
Configuring Eclipse to point to the IDE location
をヒントに...
- ano の環境
/etc/ano.ini or ~/.anorc
[build] board-model = uno cpu = 8MHzatmega328p arduino-dist = /usr/share/arduino [upload] board-model = uno cpu = 8MHzatmega328p arduino-dist = /usr/share/arduino serial-port = /dev/ttyS4 [serial] serial-port = /dev/ttyS4
続行中メモ
ano build は成功。ano upload を挑戦中。TBC!
cygwin の stty はいろいろ制限あるらしい...
stty -F /dev/ttyS4 9600 cs8 -parenb -cstopb
おなじみの 9600 8N1
ano upload の hupcl があやしい