Arduino cheat sheet: Difference between revisions
Jump to navigation
Jump to search
Line 326: | Line 326: | ||
= Develop = |
= Develop = |
||
Atmega328P 系の雑多なメモ |
|||
== objdump == |
== objdump == |
||
<syntaxhighlight lang="bash"> |
<syntaxhighlight lang="bash"> |
Revision as of 03:18, 20 October 2015
Arduino + cygwin + ino (ano) ハマりどころメモ
Without Arduino IDE
- arduino sketch を cygwin 環境内で build, upload したい。
arduino.cc の情報
Arduino from the Command Line
- によると
Arturo
- Arturo (a.k.a ano) というのがある。(ググったら ino というのがみつかるが、これがメンテされてないので ino のメンテナンス引き継ぎ版が ano のようだ)
- しかし cygwin で Windows 版 Arduino IDE (指定の 1.6.1)のコンパイラーや avrdude を起動したばあい、(cygwin からは正しく見えるのに)パスの問題があるようだ。さっくり cygwin 環境で AVR toolchain を作ることにする。
- VirtualBox いれて Linux 動かすという手もあるが、それをいっちゃぁ cygwin がかわいそう ;)
- ano build のエラー
fatal error: Arduino.h: No such file or directory #include <Arduino.h>
- ano upload のエラー
avrdude: can't open config file "/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf": No such file or directory avrdude: error reading system wide configuration file "/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf"
cygwin 環境で AVR toolchain をビルド
cygwin 準備
Installing and Updating Cygwin for 32-bit versions of Windows
- 32bit バージョンをインストールする。(64bit バージョンは AVR toolchain のコンパイルに不具合あり)
- cygwin のパッケージは以下のものを入れる。
git wget unzip zip gperf bison flex make patch autoconf gcc-g++ libncurses-devel python-setuptools pkg-config libtool
libusb問題
- cygwin のパッケージで libusb をインストールしている場合は avrdude の build で不具合があるので、あれば削除しておく。(もし必要なら avrdude の build で static link をやめる逃げ道はある)
FTDI USB serial driver (メモ書き)
- arduino のパッケージには FTDI 社のドライバが梱包されてる
http://www.ftdichip.com/Drivers/VCP.htm
- Arduino Unoは Microsoft 純正のドライバで認識する。(Windows 10)
arduino IDE 配置
- 先ほど arduino.cc の記述によると ano は arduino IDE versions 1.6.1 は動くとのこと。
Arduino 1.6.x, 1.5.x BETA
arduino-1.6.1-windows.exe
- をとってきてインストールする。
- Windows 版の IDE は最新をつかいたいので、version 1.6.1 は /Program Files/Arduino を /cygwin/usr/share 配下にコピーする。
- 名前は Arduino から arduino に変える。(たんなる趣味)
- Windows の権限管理の問題があるので arduino フォルダーのプロパティを開き、セキュリティ タブで *適切な設定* にしておく。
- Windows 版 IDE を最新したいなら、1.6.1 を uninstall して、再度最新版をインストールする。
AVR toolchain 配置
The AVR toolchain used by the Arduino IDE
- arduino IDE 1.6.1 の場合は release 3.4.5 である。tag を指定して git clone する。
git clone --depth=1 --branch 3.4.5 --single-branch https://github.com/arduino/toolchain-avr.git
- Readme.md にあるように texinfo の指定バージョン 4.13 は cygwin にないので、自分でコンパイルして配置する。
- ついでに automake-1.11.1 も cygwin のパッケージつかわないで自分でコンパイルして配置する。
texinfo-4.13.tar.gz
automake-1.11.1.tar.bz2
- arch.win32.build.bash はつかわない。なので MinGW 環境は不要。
- sourceforge の ごたごたで URL がかわってしまってソースが取れない。 build がコケるので事前にとって配置しておく。
wget http://distribute.atmel.no/tools/opensource/Atmel-AVR-GNU-Toolchain/3.4.5/avr8-headers-6.2.0.469.zip
wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-1.8.0.tar.bz2
wget http://download.savannah.gnu.org/releases/avrdude/avrdude-6.0.1.tar.gz
wget http://mirror.switch.ch/ftp/mirror/gnu/autoconf/autoconf-2.64.tar.bz2
wget http://mirror.switch.ch/ftp/mirror/gnu/automake/automake-1.11.1.tar.bz2
wget http://mirror.switch.ch/ftp/mirror/gnu/binutils/binutils-2.24.tar.bz2
wget http://mirror.switch.ch/ftp/mirror/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2
wget http://mirror.switch.ch/ftp/mirror/gnu/gdb/gdb-7.8.tar.xz
wget http://mirror.switch.ch/ftp/mirror/gnu/gmp/gmp-5.0.2.tar.bz2
wget http://mirror.switch.ch/ftp/mirror/gnu/mpfr/mpfr-3.0.0.tar.bz2
wget http://download.sourceforge.net/project/libusb-win32/libusb-win32-releases/1.2.6.0/libusb-win32-bin-1.2.6.0.zip
wget http://download.sourceforge.net/project/libusb/libusb-1.0/libusb-1.0.18/libusb-1.0.18.tar.bz2
wget http://download.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat-0.1.5/libusb-compat-0.1.5.tar.bz2
wget http://www.multiprecision.org/mpc/download/mpc-0.9.tar.gz
bash build.all.bash
- 数時間コンパイルにかかる。
なぞなエラー
build.all.bash でなぜか以下のエラー。
/bin/sh ../avrdude-6.0.1/ylwrap ../avrdude-6.0.1/lexer.l lex.yy.c lexer.c -- flex
2 [main] bison 6908 fhandler_disk_file::fixup_mmap_after_fork: requested 0xFFEA0000 != 0x0 mem alloc base 0xFFEA0000, state 0x1000, size 20480, Win32 error 487
18406 [main] bison 6908 C:\cygwin\bin\bison.exe: *** fatal error in forked process - recreate_mmaps_after_fork_failed
19179 [main] bison 6908 cygwin_exception::open_stackdumpfile: Dumping stack trace to bison.exe.stackdump
1 [main] bison 960 fork: child -1 - forked process 6908 died unexpectedly, retry 0, exit code 0x100, errno 11
bison: m4 サブプロセスが失敗しました: Resource temporarily unavailable
Makefile:1263: ターゲット 'config_gram.c' のレシピで失敗しました
make: *** [config_gram.c] エラー 1
- ビルドのどこかでコケる。avr-gcc や avr libc 系は完了してる。avrdude か gdb かで。
- avrdude.build.bash とか単体でビルドなら出ない
- どうも cygwin 固有の問題らしい。locale が問題とのこと。
- .bashrc に
export LANG=ja_JP.SJIS
export LC_ALL=C
- で解決。
- ちなみに cygwin terminal の locale ももちろん ja_JP.SJIS にしておく。
配置
- objdir を /usr/share/arduino/hardware/tools/ 配下にコピーし、tools ディレクトリの avr ディレクトリを avr.org にリネームして、objdir を avr にリネームする。
avrdude.exe
- avrdude の serial port の指定は(もし Windows で認識しているポートが 'COM5' なら) /dev/ttyS4 が動かず '\\.\com5' で動く。
- COM ポートを指定したい場合は、Windows で
デバイスマネージャ -> ポート (COM と LPT) -> Arduino Uno (COM?) -> プロパティ -> ポートの設定 -> 詳細設定 -> COM ポート番号
- で変える。
giveio services
- これが起動しない。32bit only とのこと。あと giveio はいろいろ評判わるそう。
- パラレルポートの場合に必要とのこと。なので今回は無視。
libusb-win32 問題
- cygwin でコンパイルした avrdude.exe がいろいろ win32 系の dll を見るのでうざい
arduino usb serial の windows OS での初期化
- arduino の usb を刺しただけでは cygwin から serial device (COM5) としてみえてなので、windows OS で認識させる。
シリアルポートの使い方@windows
#!/bin/sh
mode.com $1: BAUD=115200 PARITY=N DATA=8 STOP=1 to=off xon=off odsr=off octs=on dtr=off rts=on idsr=off
- このスクリプト動かす。
avrdude build メモメモ
- もし、libusb-win32 をつかわないで build する場合は libusb-1.0.18 にパッチを当てる。
diff -urN libusb-1.0.18.orig/libusb/os/windows_usb.h libusb-1.0.18/libusb/os/windows_usb.h
--- libusb-1.0.18.orig/libusb/os/windows_usb.h 2014-01-09 08:55:51.000000000 +0900
+++ libusb-1.0.18/libusb/os/windows_usb.h 2015-08-27 12:55:34.000000000 +0900
@@ -46,7 +46,7 @@
#endif
#if defined(__CYGWIN__ )
-#define _stricmp stricmp
+#define _stricmp strcasecmp
// cygwin produces a warning unless these prototypes are defined
extern int _snprintf(char *buffer, size_t count, const char *format, ...);
extern char *_strdup(const char *strSource);
- ややこしいので AVR toolchain を fork してパッチあてたので、これ使ってください
avr toolchain cygwin only masterとの差分
git clone -b cygwin_only https://github.com/nxhack/toolchain-avr.git
cd toolchain-avr
./arch.cygwin.build.bash
- (メモ) 要確認
bug #40831: LUFA AVRISP-MKII fails with avrdude 6.0.1
Arturo (ano)
ano
Arturo
stty 周りのパッチをあてる。(かなり強引に)
- fork してパッチあてたもの
fork scottdarch/Arturo (for cygwin only) masterとの差分
git clone -b cygwin_only https://github.com/nxhack/Arturo.git
cd Arturo
make install
picocom
picocom
- picocom をインストール
ano の環境
- /etc/ano.ini or ~/.anorc
- 'com-port' に Windows の COM ポートを指定する。
- ちなにみ cygwin の ttyS? は Windows の COM ポート番号からマイナス 1 の数字になる
[build]
board-model = uno
arduino-dist = /usr/share/arduino
[upload]
board-model = uno
arduino-dist = /usr/share/arduino
serial-port = /dev/ttyS4
com-port = '\\.\com5'
[serial]
serial-port = /dev/ttyS4
ano の使い方
- ino と同じなので、arduino ino build とかでググってください
cygwin メモ
cygwin terminalのロケール
- ja_JP.SJIS がよさげ。
- かつ .bashrc に
export LANG=ja_JP.SJIS
export LC_ALL=C
- MS-DOS 的な SJIS の世界と Windows+cygwin の世界の落としどころかも。
- Windows システム自体は(NT Kernel内は) Unicode なので、整合性がおかしい場合があって、いろいろ文字化けはあるかも。(グループ名とか日本語になってるとイタイ)
alias ls='ls -hFG --color=tty'
alias ll='ls -alG'
- group を非表示にする。
- (メモ) chcp.com
chcp.com 65001
chcp.com 932
cygwin terminalのショートカット
Mouse -> (ON) Clicks place command line cursor Mouse -> Right click action -> Paste
apt-cyg
apt-cyg
emacs
- .emacs
; Emacs 2x
(cond ((> emacs-major-version 19)
(progn
(set-language-environment "Japanese")
(setq default-enable-multibyte-characters t)
(setq auto-coding-functions nil)
(set-default-coding-systems 'sjis )
(set-buffer-file-coding-system 'sjis )
(set-terminal-coding-system 'sjis )
(setq default-buffer-file-coding-system 'sjis )
(setq default-terminal-coding-system 'sjis )
(set-keyboard-coding-system 'sjis)
(set-clipboard-coding-system 'sjis)
(setq inhibit-startup-message t)
(setq initial-scratch-message nil)
;;(global-font-lock-mode nil)
(require 'jka-compr)
(auto-compression-mode 1)
)))
(setq dired-listing-switches "-alG")
;;
;; whitespace
;;
(require 'whitespace)
(setq whitespace-style '(face
trailing
tabs
empty
space-mark
tab-mark
))
(setq whitespace-display-mappings
'((tab-mark ?\t [?> ?\t] [?\\ ?\t])))
(global-whitespace-mode 1)
(set-face-foreground 'whitespace-tab "brown")
;(set-face-background 'whitespace-tab "DimGray")
;
(setq-default scroll-step 1)
(line-number-mode t)
(column-number-mode t)
(setq visible-bell t)
(setq-default truncate-lines nil)
(setq next-line-add-newlines nil)
(setq minibuffer-max-depth nil)
(setq initial-scratch-message nil)
(setq inhibit-startup-message t)
(setq-default c-basic-offset 2
tab-width 4
indent-tabs-mode nil)
;
(require 'cl)
(add-to-list 'load-path "~/.emacs.d/vendor/arduino-mode")
(setq auto-mode-alist (cons '("\\.\\(pde\\|ino\\)$" . arduino-mode) auto-mode-alist))
(autoload 'arduino-mode "arduino-mode" "Arduino editing mode." t)
Emacs major mode for editing Arduino sketches.
Develop
Atmega328P 系の雑多なメモ
objdump
avr-objdump -S hoge.elf
nm
avr-nm --size-sort -C hoge.elf
HALT
AVR のニーモニックで HALT (Z80 や x86 でおなじみ) がみつからない。SLEEP てーのがそれかな?
How to let your Arduino go to sleep and wake up on an external event.
sleep_mode()
これによると、sleep_mode() は、
sleep_enable();
sleep_cpu();
sleep_disable();
を実行するらしい。(実際にアセンブリコードをみたらそのとおりだった)
avr/power.h
avr/power.h に 個別のマクロがある。(参照)
power_adc_enable() (ADコンバータ使用時)
power_spi_enable()(SPI使用時)
power_usart0_enable() (シリアルコンソール使用時)
power_timer0_enable() (タイマー0使用時、delay()やmillis()も)
power_timer1_enable()(タイマー1使用時)
power_timer2_enable()(タイマー2使用時、tone()も)
power_twi_enable()(I2C使用時)
もちろん、power_*_disable() もある。いったん power_all_disable() してから個別に設定も可。
Gammon Forum : Electronics : Microprocessors : Power saving techniques for microprocessors
- ここがまとまってる
もろもろメモ
あとにつながるメモ
xively (ザイブリー) EVRYTHNG thethings.iO AT&T M2X SORACOM ソラコム
How to send sensor data to InfluxDB from an Arduino Uno
- Time series database にブチ込む
DIY Arduino YUN Integration for PagerDuty Alerts
- PagerDuty の Alert で動く
DIY Home Automation Using Twilio, PowerSwitch, Arduino, and Pusher
- Twilio blog arduino ネタ多し
RTOS
FreeRTOS
入門
ここがいちばんいい感じ。昔を思い出しつつ...
garretlab
AVR libc
AVR Libc 日本語
IoT するなら
いろいろ検討したが (様々なシールドやPC系GW) 、これでいいやん、そこそこ安いし、arduino 的手軽さもあるし... Arduino Yún
AWS IoTをArduino Yúnで使う(少し詳しく書いてみた) | スイッチサイエンス マガジン 腹腹開発: Arduino YUN上の温湿度センサデータをIBM IoT Foundation QuickStartへ送信する 【電子工作】Arduino YúnをGoogle DocsやTwitterと連携してみた | GMOインターネット 次世代システム研究室 Using Parse for IoT to Create an Order Button awsIoT - 太陽光パネルの発電量をAWS IoTとAmazon Elasticsearch Serviceを使って可視化してみる - Qiita
SDK for connecting to AWS IoT from an Arduino Yún
OpenWrt
Fork of the openwrt project to add gccgo and libgo
Burgin's Data Thing | Experiment 2 - How to secure Beaver
Serial to Network Proxy (ser2net)
tunneling - Reverse ssh tunnel を安定運用する - Qiita init.dスクリプトを書いてみる - MQTT and …