Arduino cheat sheet: Difference between revisions
No edit summary |
|||
Line 111: | Line 111: | ||
*配置 | *配置 | ||
objdir を /usr/share/arduino/hardware/tools にコピーし、tools ディレクトリの avr ディレクトリを avr.org にリネームして、objdir を avr にリネームする。 | |||
*avrdude build メモメモ | *avrdude build メモメモ |
Revision as of 16:14, 27 August 2015
Arduino + cygwin + ino (ano) ハマりどころメモ
Without Arduino IDE
arduino を cygwin 環境内で build, upload したい。
- arduino.cc の情報
Arduino from the Command Line
- によると
Arturo
- Arturo (a.k.a ano) というのがある。(ググったら ino というのがみつかるが、これがメンテされてないので ino のメンテナンス引き継ぎ版が ano のようだ)
fatal error: Arduino.h: No such file or directory #include <Arduino.h>
avrdude: can't open config file "/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf": No such file or directory avrdude: error reading system wide configuration file "/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf"
しかし cygwin で Arduino IDE の コンパイラーや avrdude を起動したばあい、(cygwin からは正常に見えるが)パスの問題があるようだ。さっくり cygwin 環境で AVR toolchain を作ることにする。
- cygwin 準備
Installing and Updating Cygwin for 32-bit versions of Windows
- 32bit バージョンをインストールする。(64bit バージョンは AVR toolchain のコンパイルに不具合あり)
cygwin のパッケージは以下のものを入れる。
git wget unzip zip gperf bison flex make patch autoconf gcc-g++ libncurses-devel pkg-config python-setuptools
- libusb問題
cygwin のパッケージで libusb をインストールしている場合は avrdude の build で不具合があるので、あれば削除しておく。(もし必要なら avrdude の build で static link をやめる逃げ道はある)
- FTDI USB serial driver (メモ書き)
arduino のパッケージには FTDI 社のドライバが梱包されてる
http://www.ftdichip.com/Drivers/VCP.htm
- arduino IDE 配置
先ほど arduino.cc の記述によると ano は arduino IDE versions 1.6.1 は動くとのこと。
Arduino 1.6.x, 1.5.x BETA
arduino-1.6.1-windows.exe
- をとってきてインストールする。
- Windows 版の IDE は最新をつかいたいので、version 1.6.1 は /Program Files/Arduino を /cygwin/usr/share 配下に移動させる。
- 名前は Arduino から arduino に変える。(たんなる趣味)
- Windows の権限管理の問題があるので arduino フォルダーのプロパティを開き、セキュリティ タブで *適切な設定* にしておく。
- AVR toolchain 配置
The AVR toolchain used by the Arduino IDE
- arduino IDE 1.6.1 の場合は release 3.4.5 である。tag を指定して git clone する。
git clone --depth=1 --branch 3.4.5 --single-branch https://github.com/arduino/toolchain-avr.git
- Readme.md にあるように texinfo の指定バージョン 4.13 は cygwin にないので、自分でコンパイルする。
- ついでに automake-1.11.1 も cygwin のパッケージつかわないで自分でコンパイルする。
texinfo-4.13.tar.gz
automake-1.11.1.tar.bz2
- arch.win32.build.bash はつかわない。なので MinGW 環境は不要。
sourceforge の ごたごたで URL がかわってしまって wget してるソースが取れない。 build がコケるので事前にとって配置しておく。
wget http://distribute.atmel.no/tools/opensource/Atmel-AVR-GNU-Toolchain/3.4.5/avr8-headers-6.2.0.469.zip wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-1.8.0.tar.bz2 wget http://download.savannah.gnu.org/releases/avrdude/avrdude-6.0.1.tar.gz wget http://mirror.switch.ch/ftp/mirror/gnu/autoconf/autoconf-2.64.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/automake/automake-1.11.1.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/binutils/binutils-2.24.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/gdb/gdb-7.8.tar.xz wget http://mirror.switch.ch/ftp/mirror/gnu/gmp/gmp-5.0.2.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/mpfr/mpfr-3.0.0.tar.bz2 wget http://jaist.dl.sourceforge.net/project/libusb-win32/libusb-win32-releases/1.2.6.0/libusb-win32-bin-1.2.6.0.zip wget http://jaist.dl.sourceforge.net/project/libusb/libusb-1.0/libusb-1.0.18/libusb-1.0.18.tar.bz2 wget http://jaist.dl.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat-0.1.5/libusb-compat-0.1.5.tar.bz2 wget http://www.multiprecision.org/mpc/download/mpc-0.9.tar.gz
bash build.all.bash
数時間コンパイルにかかる。
- avrdude.exe
avrdude の serial port の指定は /dev/ttyS? が動かず '\\.\com?' で動く。
- arduino usb serial の windows OS での初期化。
arduino の usb を刺しただけでは OS から serial device (COM5) としてみえてなので、windows OS で認識させる。
シリアルポートの使い方@windows
#!/bin/sh mode.com $1: BAUD=115200 PARITY=N DATA=8 STOP=1 to=off xon=off odsr=off octs=on dtr=off rts=on idsr=off
このスクリプト動かす。
- 配置
objdir を /usr/share/arduino/hardware/tools にコピーし、tools ディレクトリの avr ディレクトリを avr.org にリネームして、objdir を avr にリネームする。
- avrdude build メモメモ
もし、libusb-win32 をつかわないで build する場合は libusb-1.0.18 にパッチを当てる。
diff -urN libusb-1.0.18.orig/libusb/os/windows_usb.h libusb-1.0.18/libusb/os/windows_usb.h --- libusb-1.0.18.orig/libusb/os/windows_usb.h 2014-01-09 08:55:51.000000000 +0900 +++ libusb-1.0.18/libusb/os/windows_usb.h 2015-08-27 12:55:34.000000000 +0900 @@ -46,7 +46,7 @@ #endif #if defined(__CYGWIN__ ) -#define _stricmp stricmp +#define _stricmp strcasecmp // cygwin produces a warning unless these prototypes are defined extern int _snprintf(char *buffer, size_t count, const char *format, ...); extern char *_strdup(const char *strSource);
Arturo (ano)
- ano
- ano patch
diff -urN Arturo.orig/ano/commands/upload.py Arturo/ano/commands/upload.py --- Arturo.orig/ano/commands/upload.py 2015-08-27 12:14:09.000000000 +0900 +++ Arturo/ano/commands/upload.py 2015-08-27 12:18:52.000000000 +0900 @@ -66,7 +66,8 @@ # send a hangup signal when the last process closes the tty file_switch = '-f' if platform.system() == 'Darwin' else '-F' - ret = subprocess.call([self.e['stty'], file_switch, port, 'hupcl']) + #ret = subprocess.call([self.e['stty'], file_switch, port, 'hupcl']) + ret = subprocess.call([self.e['stty'], file_switch, port, 'cs8']) if ret: raise Abort("stty failed") @@ -133,7 +134,8 @@ self.e['avrdude'], '-C', self.e['avrdude.conf'], '-p', BoardModels.getValueForVariant(board, boardVariant, 'build', 'mcu'), - '-P', port, + #'-P', port, + '-P', '\\.\com5', '-c', protocol, '-b', BoardModels.getValueForVariant(board, boardVariant, 'upload', 'speed'), '-D',
- picocom
picocom
- ano の環境
/etc/ano.ini or ~/.anorc
[build] board-model = uno cpu = 8MHzatmega328p arduino-dist = /usr/share/arduino [upload] board-model = uno cpu = 8MHzatmega328p arduino-dist = /usr/share/arduino serial-port = /dev/ttyS4 [serial] serial-port = /dev/ttyS4