Arduino cheat sheet: Difference between revisions
Jump to navigation
Jump to search
Line 11: | Line 11: | ||
*cygwin 準備 | *cygwin 準備 | ||
[https://cygwin.com/install.html Installing and Updating Cygwin for 32-bit versions of Windows] | [https://cygwin.com/install.html Installing and Updating Cygwin for 32-bit versions of Windows] | ||
:32bit バージョンをインストールする。(64bit バージョンは avr tool のコンパイルに不具合あり) | |||
cygwin のパッケージは以下のものを入れる。 | |||
<pre> | |||
git | |||
wget | |||
unzip | |||
zip | |||
gperf | |||
bison | |||
flex | |||
make | |||
patch | |||
autoconf | |||
gcc-g++ | |||
libncurses-devel | |||
python-setuptools | |||
</pre> | |||
*arduino IDE 配置 | *arduino IDE 配置 |
Revision as of 15:32, 26 August 2015
Arduino + cygwin + ino (ano) ハマりどころメモ
Without Arduino IDE
arduino を cygwin 環境内で build, upload したい。
- arduino.cc の情報
Arduino from the Command Line
- によると
Arturo
- Arturo a.k.a ano というのがある。(Webでは ino というのがみつかるがメンテされてないので ino のメンテナンス引き継ぎ版が ano のようだ)
- cygwin 準備
Installing and Updating Cygwin for 32-bit versions of Windows
- 32bit バージョンをインストールする。(64bit バージョンは avr tool のコンパイルに不具合あり)
cygwin のパッケージは以下のものを入れる。
git wget unzip zip gperf bison flex make patch autoconf gcc-g++ libncurses-devel python-setuptools
- arduino IDE 配置
先ほど arduino.cc の記述によると ano は arduino IDE versions 1.6.1 は動くとのこと。
Arduino 1.6.x, 1.5.x BETA arduino-1.6.1-windows.exe
- をとってきてインストールする。
- Windows 版の IDE は最新をつかいたいので、version 1.6.1 は /Program Files/Arduino を /cygwin/usr/share 配下に移動させる。
- 名前は Arduino から arduino に変える。(たんなる趣味)
- Windows の権限管理の問題があるので arduino フォルダーのプロパティを開き、セキュリティ タブで *適切な設定* にしておく。
- AVR toolchain 配置
The AVR toolchain used by the Arduino IDE
- arduino IDE 1.6.1 の場合は release 3.4.5 である。tag を指定して git clone する。
git clone -b 3.4.5 https://github.com/arduino/toolchain-avr.git
- toolchain-avr ハマりどころ
git wget unzip zip gperf bison flex make patch *** automake autoconf gcc-g++ *** texinfo (must be at version 4.13 since 5+ won't work) libncurses-devel python-setuptools
Readme.md にあるように texinfo の指定バージョン 4.13 は cygwin にないので、自分でコンパイル。 ついでに automake-1.11.1 texinfo-4.13 は cygwin のパッケージつかわないで自分でコンパイルする。
arch.win32.build.bash はつかわない。なので MinGW 環境は不要。
wget してるソースが取れない場合があると build がコケるので事前にとっておく。
wget http://distribute.atmel.no/tools/opensource/Atmel-AVR-GNU-Toolchain/3.4.5/avr8-headers-6.2.0.469.zip wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-1.8.0.tar.bz2 wget http://download.savannah.gnu.org/releases/avrdude/avrdude-6.0.1.tar.gz wget http://mirror.switch.ch/ftp/mirror/gnu/autoconf/autoconf-2.64.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/automake/automake-1.11.1.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/binutils/binutils-2.24.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/gcc/gcc-4.8.1/gcc-4.8.1.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/gdb/gdb-7.8.tar.xz wget http://mirror.switch.ch/ftp/mirror/gnu/gmp/gmp-5.0.2.tar.bz2 wget http://mirror.switch.ch/ftp/mirror/gnu/mpfr/mpfr-3.0.0.tar.bz2 wget http://switch.dl.sourceforge.net/project/libusb-win32/libusb-win32-releases/1.2.6.0/libusb-win32-bin-1.2.6.0.zip wget http://switch.dl.sourceforge.net/project/libusb/libusb-1.0/libusb-1.0.18/libusb-1.0.18.tar.bz2 wget http://switch.dl.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat-0.1.5/libusb-compat-0.1.5.tar.bz2 wget http://www.multiprecision.org/mpc/download/mpc-0.9.tar.gz
bash build.all.bash
数時間コンパイルにかかる。
メモ検証: -P '\\.\com5'
- arduino usb serial の windows OS での初期化。
arduino の usb を刺しただけでは OS から serial device (COM5) としてみえてなので、windows OS で認識させる。
シリアルポートの使い方@windows
#!/bin/sh mode.com $1: BAUD=115200 PARITY=N DATA=8 STOP=1 to=off xon=off odsr=off octs=on dtr=off rts=on idsr=off
このスクリプト動かす。
- 配置
Configuring Eclipse to point to the IDE location
をヒントに...
- cygwin 特有の問題
toolchain-avr を cygwin で compile The AVR toolchain used by the Arduino IDE
- ano の環境
/etc/ano.ini or ~/.anorc
[build] board-model = uno cpu = 8MHzatmega328p arduino-dist = /usr/share/arduino [upload] board-model = uno cpu = 8MHzatmega328p arduino-dist = /usr/share/arduino serial-port = /dev/ttyS4 [serial] serial-port = /dev/ttyS4